| Issue Date | Title | Author(s) | Type | Access |
1 | 2019 | The Effect of External Fixator Configurations on the Dynamic Compression Load: An Experimental and Numerical Study | Amaro, Ana Martins ; Paulino, Maria Fátima ; Roseiro, Luís Manuel ; Neto, Maria Augusta | article | openAccess |
2 | 2014 | Theoretical model for the mechanical behavior of prestressed beams under torsion | Lopes, Sergio M. R. ; Bernardo, Luís F.A. | article | openAccess |
3 | Oct-2014 | Flexure of continuous HSC beams with external CFRP tendons: effects of fibre elastic modulus and steel ratio | Lou, Tiejiong ; Lopes, Sérgio M. R. ; Lopes, Adelino V. | article | openAccess |
4 | 2014 | Neutral axis depth and moment redistribution in FRP and steel reinforced concrete continuous beams | Lou, Tiejiong ; Lopes, Sérgio M. R. ; Lopes, Adelino V. | article | openAccess |
5 | Nov-2014 | Factors affecting moment redistribution at ultimate in continuous beams prestressed with external CFRP tendons | Lou, Tiejiong ; Lopes, Sérgio M. R. ; Lopes, Adelino V. | article | openAccess |
6 | Apr-2013 | Effects of alkaline and acid solutions on glass/epoxy composites | Amaro, A. M. ; Reis, P. N. B. ; Neto, M. A. ; Louro, C. | article | openAccess |
7 | 15-Dec-2013 | Influence of Al content on the mechanical properties and thermal stability in protective and oxidation atmospheres of Zr–Cr–Al–N coatings | Li, W. Z. ; Liu, H. W. ; Evaristo, M. ; Polcar, T. ; Cavaleiro, A. | article | openAccess |
8 | 10-Sep-2013 | A parameter for quantitative analysis of plasticity induced crack closure | Antunes, F. V. ; Correia, L. ; Ramalho, A. L. | article | openAccess |
9 | Nov-2014 | TiO2:WO3 composite humidity sensors doped with ZnO and CuO investigated by impedance spectroscopy | Faia, Pedro M. ; Jesus, Emanuel L. ; Louro, Cristina S. | article | openAccess |
10 | Dec-2013 | Low velocity impact damage evaluation in fiber glass composite plates using PZT sensors | Santos, M. J. ; Santos, J. B. ; Amaro, A. M. ; Neto, M. A. | article | openAccess |
11 | Feb-2014 | External CFRP tendon members: Secondary reactions and moment redistribution | Lou, Tiejiong ; Lopes, Sérgio M. R. ; Lopes, Adelino V. | article | openAccess |
12 | 1-Sep-2013 | Development of a quasi-dry electrode for EEG recording | Mota, A. R. ; Duarte, L. ; Rodrigues, D.; Martins, A. C. ; Machado, A. V. ; Vaz, F. ; Fiedler, P. ; Haueisen, J. ; Nóbrega, J. M. ; Fonseca, C. | article | openAccess |
13 | Mar-2014 | Structural and electrochemical characterization of Zr–C–N–Ag coatings deposited by DC dual magnetron sputtering | Velasco, S. Calderon ; Lopez, V. ; Alves, C .F. Almeida ; Cavaleiro, A. ; Carvalho, S. | article | openAccess |
14 | 1-Jan-2014 | Influence of albumin on the tribological behavior of Ag–Ti (C, N) thin films for orthopedic implants | Alves, C. F. Almeida ; Oliveira, F. ; Carvalho, I. ; Piedade, A. P. ; Carvalho, S. | article | openAccess |
15 | 1-Nov-2013 | Nanoindentation of functionally graded hybrid polymer/metal thin films | Nunes, J. ; Piedade, A. P. | article | openAccess |
16 | 15-Oct-2013 | Influence of Ag content on mechanical and tribological behavior of DLC coatings | Manninen, N. K. ; Ribeiro, F. ; Escudeiro, A. ; Polcar, T. ; Carvalho, S. ; Cavaleiro, A. | article | openAccess |
17 | Aug-2013 | Direct off-line robot programming via a common CAD package | Neto, Pedro ; Mendes, Nuno | article | openAccess |
18 | 30-Oct-2014 | Influence of Zr alloying on the mechanical properties, thermal stability and oxidation resistance of Cr–Al–N coatings | Li, W. Z. ; Chen, Q. Z. ; Polcar, T. ; Serra, R. ; Cavaleiro, A. | article | openAccess |
19 | Sep-2012 | Pulsed direct current magnetron sputtered nanocrystalline tin oxide films | Reddy, A. Sivasankar ; Figueiredo, N. M. ; Cavaleiro, A. | article | openAccess |
20 | 30-Aug-2013 | Indentation and scratch testing of DLC-Zr coatings on ultrafine-grained titanium processed by high-pressure torsion | Wang, Chuan Ting ; Escudeiro, Ana ; Polcar, Tomas ; Cavaleiro, Albano ; Wood, Robert J. K. ; Gao, Nong ; Langdon, Terence G. | article | openAccess |
21 | Jun-2013 | Nanocrystalline Au:Ag:SnO2 films prepared by pulsed magnetron sputtering | Reddy, A. Sivasankar ; Figueiredo, N. M. ; Cavaleiro, A. | article | openAccess |
22 | Oct-2013 | Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration | Mendes, R. ; Ribeiro, J. B. ; Loureiro, A. | article | openAccess |
23 | Mar-2012 | Effects of the constitution of CrON diffusion barrier on the oxidation resistance and interfacial fracture of duplex coating system | Li, W. Z. ; Yi, D. Q. ; Li, Y. Q. ; Liu, H. Q. ; Sun, C. | article | openAccess |
24 | Nov-2014 | Effect of tool geometry on friction stir processing and fatigue strength of MIG T welds on Al alloys | Jesus, J. S. de ; Loureiro, A. ; Costa, J. M. ; Ferreira, J .M. | article | openAccess |
25 | Oct-2013 | Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing | Silva, J. da ; Costa, J. M. ; Loureiro, A. ; Ferreira, J. M. | article | openAccess |
26 | Sep-2013 | Fatigue behaviour of nanoclay reinforced epoxy resin composites | Ferreira, J. A. M. ; Borrego, L. P. ; Costa, J. D. M. ; Capela, C. | article | openAccess |
27 | Jul-2011 | Carbon-based coatings doped by copper: Tribological and mechanical behavior in olive oil lubrication | Balestra, R. M. ; Castro, A. M. G. ; Evaristo, M. ; Escudeiro, A. ; Mutafov, Petr ; Polcar, T. ; Cavaleiro, A. | article | openAccess |
28 | 15-Nov-2013 | Nanocomposite Ag:TiN thin films for dry biopotential electrodes | Pedrosa, P. ; Machado, D. ; Lopes, C. ; Alves, E. ; Barradas, N. P. ; Martin, N. ; Macedo, F. ; Fonseca, C. ; Vaz, F. | article | openAccess |
29 | Nov-2014 | Structural and mechanical properties of nanocrystalline Zr co-sputtered a-C(:H) amorphous films | Escudeiro, A. ; Figueiredo, N. M. ; Polcar, T. ; Cavaleiro, A. | article | openAccess |
30 | Apr-2011 | An XPS study of Au alloyed Al–O sputtered coatings | Figueiredo, N. M. ; Carvalho, N. J. M. ; Cavaleiro, A. | article | openAccess |
31 | 15-Aug-2013 | High temperature properties of the Cr-Nb-Al-N coatings with increasing Al contents | Li, W. Z. ; Polcar, T. ; Evaristo, M. ; Cavaleiro, A. | article | openAccess |
32 | Feb-2014 | Effect of corrosive solutions on composites laminates subjected to low velocity impact loading | Mortas, N. ; Er, O. ; Reis, P. N. B. ; Ferreira, J. A. M. | article | openAccess |
33 | 25-Sep-2014 | Structural, chemical, optical and mechanical properties of Au doped Al-N sputtered coatings | Figueiredo, N. M. ; Vaz, F. ; Cunha, L. ; Rodil, S. E. ; Cavaleiro, A. | article | openAccess |
34 | 15-Oct-2013 | Ultra-low friction W–S–N solid lubricant coating | Gustavsson, Fredrik ; Jacobson, Staffan ; Cavaleiro, Albano ; Polcar, Tomas | article | openAccess |
35 | Sep-2013 | Influence of multi-impacts on GFRP composites laminates | Amaro, A. M. ; Reis, P. N. B. ; Moura, M. F. S. F. ; Neto, M. A. | article | openAccess |
36 | 15-Jan-2014 | The effect of increasing V content on the structure, mechanical properties and oxidation resistance of Ti–Si–V–N films deposited by DC reactive magnetron sputtering | Fernandes, F. ; Loureiro, A. ; Polcar, T. ; Cavaleiro, A. | article | openAccess |
37 | 2012 | Influence of tool shoulder geometry on properties of friction stir welds in thin copper sheets | Galvão, I. ; Leal, R. M. ; Rodrigues, D. M. ; Loureiro, A. | article | openAccess |
38 | Dec-2013 | Effect of saline environment on mechanical properties of adhesive joints | Pereira, A. M. ; Reis, P. N. B. ; Ferreira, J. A. M. ; Antunes, F. V. | article | openAccess |
39 | 15-Mar-2014 | Numerical study of contact forces for crack closure analysis | Antunes, F. V. ; Chegini, A. G. ; Correia, L. ; Branco, R. | article | openAccess |
40 | 20-Dec-2019 | Effect of Fibre Orientation and Hostile Solutions on Stress Relaxation of Glass/Polyamide Composites | Reis, Paulo Nobre Balbis Dos; Amaro, Ana Martins ; Neto, Maria Augusta | article | openAccess |
41 | 2019 | Condition Monitoring with Prediction Based on Diesel Engine Oil Analysis: A Case Study for Urban Buses | Raposo, Hugo ; Farinha, Torres ; Fonseca, Inácio ; Ferreira, L. Andrade | article | openAccess |
42 | 2019 | Fatigue Crack Growth in Maraging Steel Obtained by Selective Laser Melting | Antunes, Fernando ; Santos, Luís; Capela, Carlos ; Ferreira, José A. M. ; Costa, José ; Jesus, Joel de ; Prates, Pedro | article | openAccess |
43 | 2019 | Overview on the Evolution of Laser Welding of Vascular and Nervous Tissues | Gomes, Diogo Francisco; Galvão, Ivan ; Loja, Maria Amélia Ramos | article | openAccess |
44 | 2019 | Electrochemical Corrosion of Nano-Structured Magnetron-Sputtered Coatings | Calderon, Sebastian; Alves, Cristiana F. Almeida; Manninen, Noora K. ; Cavaleiro, Albano ; Carvalho, Sandra | article | openAccess |
45 | 2019 | Response of fabric insert injection overmolding PP based composites subjected to single and muti-impact | Ferreira, J. A. M. ; Febra, T. ; Costa, J.D. ; Capela, Carlos | article | openAccess |
46 | 14-Dec-2019 | Hand-Arm Vibration Assessment and Changes in the Thermal Map of the Skin in Tennis Athletes during the Service | Amaro, Ana M. ; Paulino, Maria F. ; Neto, Maria A. ; Roseiro, Luís Manuel | article | openAccess |
47 | 2019 | Bacterial Metabolites Produced Under Iron Limitation Kill Pinewood Nematode and Attract Caenorhabditis elegans | Proença, Diogo Neves ; Heine, Thomas; Senges, Christoph H R; Bandow, Julia E; Morais, Paula V; Tischler, Dirk | article | openAccess |
48 | 22-Jan-2019 | 4D Printing: The Shape-Morphing in Additive Manufacturing | Piedade, A. P. | article | openAccess |
49 | 12-Jun-2019 | EBSD Analysis of Metal Matrix Nanocomposite Microstructure Produced by Powder Metallurgy | Carneiro, Íris; Viana, Filomena ; Vieira, Manuel F. ; Fernandes, José V. ; Simões, Sónia | article | openAccess |
50 | 15-Oct-2019 | Brief Overview on Bio-Based Adhesives and Sealants | Magalhães, Solange ; Alves, Luís ; Medronho, Bruno ; Fonseca, Ana C. ; Romano, Anabela; Coelho, Jorge F. J. ; Norgren, Magnus | article | openAccess |