Please use this identifier to cite or link to this item:
https://hdl.handle.net/10316/38968
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Trindade, Bruno Miguel Quelhas de Sacadura Cabral | - |
dc.contributor.advisor | Nascimento, Luís | - |
dc.contributor.author | Dantas, João Pedro Ramos Teles | - |
dc.date.accessioned | 2017-03-28T15:04:58Z | - |
dc.date.available | 2017-03-28T15:04:58Z | - |
dc.date.issued | 2015-03-12 | - |
dc.identifier.uri | https://hdl.handle.net/10316/38968 | - |
dc.description | Dissertação de Mestrado Integrado em Engenharia Mecânica apresentada à Faculdade de Ciências e Tecnologia da Universidade de Coimbra | pt |
dc.description.abstract | Este projeto foi desenvolvido na Mahle Componentes de motor S.A. de Portugal, onde são produzidos anéis de pistão (segmentos), e teve como objetivo a otimização do diâmetro de processamento do anel I-Shaped com perfil V-form de forma a melhorar a sua circularidade e a cota h55 junto às pontas. Para tal, procedeu-se à alteração da cota do diâmetro final, em função dos valores teóricos obtidos por uma folha de cálculo própria para este tipo de anel. Esta alteração tem uma maior relevância na fase inicial do processamento do anel, mais propiamente na fase do enrolamento e corte. Para avaliar eventuais alterações significativas na dimensão do perfil, recorreu-se ao laboratório de metrologia da Mahle Na análise dos resultados, verificou-se uma melhoria da cota h55 nas extremidades do anel. A nível de circularidade, verificou-se uma melhoria ao longo do perímetro do anel. Os resultados obtidos nas extremidades foram inconclusivos. Neste estágio foram ainda efetuadas atividades paralelas com o intuito de identificar e resolver alguns problemas existentes na linha de produção do anel de aço. | pt |
dc.description.abstract | This project was developed in Mahle Components of Motor S.A of Portugal, where piston rings are produced and had as objective optimizing the diameter processing of I-Shaped ring with V-form profile in order to improve the circularity and the quota h55 in the ends of the ring. With this purpose, the dimension of the final diameter was changed, depending on the theoretical values obtained by a separate worksheet for this type of ring. This change has a great relevance in the initial phase, more specifically in the coil and cutting of the ring. The evaluation of changes in the dimension of the profile was performed at the metrology laboratory of Mahle. The results showed an improvement in quota h55 at the ends of the ring. Concerning circularity, the results obtained in the ends of the ring are inconclusive, but the circularity along the ring circumference was improved. Parallel activities in the line of steel ring were carried out in order to identify and solve some current problems in the production line. | pt |
dc.language.iso | por | pt |
dc.rights | openAccess | pt |
dc.subject | Enrolamento | pt |
dc.subject | H55 | pt |
dc.subject | Circularidade | pt |
dc.subject | Anéis | pt |
dc.subject | I-Shaped | pt |
dc.subject | Vform | pt |
dc.subject | coil | pt |
dc.subject | H55 | pt |
dc.subject | circularity | pt |
dc.subject | rings | pt |
dc.subject | I-shaped | pt |
dc.subject | V-form | pt |
dc.title | Enrolamento de anéis de aço: otimização do processo | pt |
dc.type | masterThesis | pt |
degois.publication.location | Coimbra | pt |
dc.date.embargo | 2015-03-12 | * |
dc.identifier.tid | 201664704 | pt |
thesis.degree.grantor | 00500::Universidade de Coimbra | pt |
thesis.degree.name | Mestrado Integrado em Engenharia Mecânica | pt |
uc.degree.grantorUnit | 0501 - Faculdade de Ciências e Tecnologia | por |
uc.rechabilitacaoestrangeira | no | pt |
uc.date.periodoEmbargo | 0 | pt |
uc.controloAutoridade | Sim | - |
item.openairecristype | http://purl.org/coar/resource_type/c_18cf | - |
item.openairetype | masterThesis | - |
item.cerifentitytype | Publications | - |
item.grantfulltext | open | - |
item.fulltext | Com Texto completo | - |
item.languageiso639-1 | pt | - |
crisitem.advisor.researchunit | CEMMPRE - Centre for Mechanical Engineering, Materials and Processes | - |
crisitem.advisor.orcid | 0000-0003-2971-8465 | - |
Appears in Collections: | UC - Dissertações de Mestrado FCTUC Eng.Mecânica - Teses de Mestrado |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Enrolamento e corte de aneis de aco.pdf | 4.21 MB | Adobe PDF | View/Open |
Page view(s)
294
checked on Apr 23, 2024
Download(s) 50
573
checked on Apr 23, 2024
Google ScholarTM
Check
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.