Utilize este identificador para referenciar este registo: https://hdl.handle.net/10316/115682
Título: Effect of varying functional monomers in experimental self-adhesive composites: polymerization kinetics, cell metabolism influence and sealing ability
Autor: Ferreira, Marta Nunes
Neves Dos Santos, Marta
Fernandes, Inês
Marto, Carlos Miguel
Laranjo, Mafalda 
Silva, Diana
Serro, Ana Paula
Carrilho, Eunice 
Botelho, Maria Filomena
Azul, Ana Mano
Delgado, António Hs
Palavras-chave: composites; kinetics; monomers; polymerization; self-adhesive
Data: 12-Out-2023
Editora: IOP Publishing Ltd
Projeto: info:eu-repo/grantAgreement/FCT/6817 - DCRRNI ID/UIDB/00100/2020 
UIDP/00100/2020 
LA/P/0056/2020 
info:eu-repo/grantAgreement/UIDB/04585/2020 
Título da revista, periódico, livro ou evento: Biomedical Materials
Volume: 18
Número: 6
Resumo: The aim was to evaluate the effects of adding different functional monomers to experimental self-adhesive composites (SACs) on polymerization kinetics, cell metabolic activity, and sealing ability. SACs were formulated using urethane dimethacrylate as the base monomer and triethylene glycol dimethacrylate. Additionally, 10 wt.% of distinct functional monomers were added - 10-methacryloyloxydecyl dihydrogen phosphate, glycerol phosphate dimethacrylate (GPDM), 2-hydroxyethyl methacrylate (HEMA) or hydroxyethyl acrylamide (HEAA). ATR-FTIR was used to determine real-time polymerization kinetics (20 min,n= 3). The final extrapolated conversion and polymerization rates were determined (DC,max;Rp,max). TheDC,maxvalues were employed to calculate volumetric shrinkage. The MTT assay was performed on MDPC-23 cells using disc extracts at different concentrations (n= 8). Class V cavities were prepared in 60 sound human molars, assigned to six groups (n= 10), depending on the composite used and aging type (T0 or TC, if thermocycled for 10 000 cycles). One-way ANOVA, two-way, and Kruskal-Wallistests were employed to treat the data (ɑ= 0.05). Varying the functional monomers had a large impact on DC,max, as confirmed by one-way ANOVA (p<0.001). The highest was obtained for HEMA (64 ± 3%). The HEMA and HEAA formulations were found to be significantly more toxic at concentrations below 100%. For microleakage, having a functional monomer or not did not show any improvement, irrespective of margin or aging period (Mann-hitney U,p> 0.05). Larger functional monomers MDP and GPDM affected polymerization properties. Conversely, their acidity did not seem to be detrimental to cell metabolic activity. Regarding sealing ability, it seems that the functional monomers did not bring an advantage to the composites. Varying the functional monomer in SACs had a clear impact on the polymerization kinetics as well as on their cytotoxic potential. However, it did not confer better microleakage and sealing. Claiming self-adhesiveness based only on functional monomers seems dubious.
URI: https://hdl.handle.net/10316/115682
ISSN: 1748-6041
1748-605X
DOI: 10.1088/1748-605X/acfc8d
Direitos: openAccess
Aparece nas coleções:I&D CEMMPRE - Artigos em Revistas Internacionais

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato
Ferreira_2023_Biomed._Mater._18_065014.pdf1.47 MBAdobe PDFVer/Abrir
Mostrar registo em formato completo

Google ScholarTM

Verificar

Altmetric

Altmetric


Este registo está protegido por Licença Creative Commons Creative Commons