Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/111862
Título: | Laser texturing of piston ring for tribological performance improvement | Autor: | Ferreira, Rita Carvalho, Óscar Sobral, Luís Carvalho, Sandra Silva, Filipe |
Palavras-chave: | piston ring; surface texture; friction; wear | Data: | 2023 | Editora: | Springer Nature | Projeto: | This work was supported by Fundação para a Ciência e Tecnologia (FCT) and MAHLE, Componentes de Motores, S.A. through the grant SFRH/BDE/110654/2015 and by the project Add-Additive with the reference POCI-01-0247-FEDER- 024533. | Título da revista, periódico, livro ou evento: | Friction | Volume: | 11 | Número: | 10 | Resumo: | The radial surface coating layer of compression piston rings is used to improve their wear resistance during the internal combustion engine operation. However, at top dead centers, the friction coefficient of the piston ring–cylinder liner pair is detrimental to the engine’s tribological performance. In this work, dimples with different texture dimensions and densities were tested in a home-developed tribometer. The friction coefficient was measured for all samples, and for those with the best results, their wear resistance was assessed. The texture with an aspect ratio of 0.25 and a density area of 15% reported the best tribological results. | URI: | https://hdl.handle.net/10316/111862 | ISSN: | 2223-7690 2223-7704 |
DOI: | 10.1007/s40544-022-0723-5 | Direitos: | openAccess |
Aparece nas coleções: | I&D CEMMPRE - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Laser-texturing-of-piston-ring-for-tribological-performance-improvementFriction.pdf | 4.91 MB | Adobe PDF | Ver/Abrir |
Este registo está protegido por Licença Creative Commons