ID: 14515 - Mechanical and wear behaviours of nano and microfilled polymeric composite: effect of filler fraction and size
|
972
|
ID: 14509 - Adsorption of bovine serum albumin on Zr co-sputtered a-C(:H) films: implication on wear behaviour
|
833
|
ID: 25851 - Structural and electrochemical characterization of Zr–C–N–Ag coatings deposited by DC dual magnetron sputtering
|
656
|
ID: 25858 - A parameter for quantitative analysis of plasticity induced crack closure
|
633
|
ID: 25859 - Effects of alkaline and acid solutions on glass/epoxy composites
|
587
|
ID: 25862 - Ultra-low friction W–S–N solid lubricant coating
|
561
|
ID: 25855 - Impact strength of composites with nano-enhanced resin after fire exposure
|
539
|
ID: 25861 - High temperature properties of the Cr-Nb-Al-N coatings with increasing Al contents
|
492
|
ID: 14511 - TiO2:WO3 composite humidity sensors doped with ZnO and CuO investigated by impedance spectroscopy
|
474
|
ID: 25850 - The effect of increasing V content on the structure, mechanical properties and oxidation resistance of Ti–Si–V–N films deposited by DC reactive magnetron sputtering
|
469
|
ID: 25860 - Indentation and scratch testing of DLC-Zr coatings on ultrafine-grained titanium processed by high-pressure torsion
|
462
|
ID: 14510 - Morphology and strength of acrylonitrile butadiene styrene welds performed by robotic friction stir welding
|
447
|
ID: 14504 - TiAgx thin films for lower limb prosthesis pressure sensors: effect of composition and structural changes on the electrical and thermal response of the films
|
440
|
ID: 25848 - Nanocomposite Ag:TiN thin films for dry biopotential electrodes
|
435
|
ID: 14501 - Influence of aluminium alloy type on dissimilar friction stir lap welding of aluminium to copper
|
415
|
ID: 25845 - Nanocrystalline Au:Ag:SnO2 films prepared by pulsed magnetron sputtering
|
409
|
ID: 14507 - Ti1−xAgx electrodes deposited on polymer based sensors
|
393
|
ID: 14482 - Fatigue Behaviour of T Welded Joints Rehabilitated by Tungsten Inert Gas and Plasma Dressing
|
374
|
ID: 39091 - Comparing Metamodeling Techniques For Variability Analysis In Sheet Metal Forming Processes
|
368
|
ID: 14500 - Influence of albumin on the tribological behavior of Ag–Ti (C, N) thin films for orthopedic implants
|
353
|
ID: 14496 - Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration
|
344
|
ID: 14512 - Flexure of continuous HSC beams with external CFRP tendons: effects of fibre elastic modulus and steel ratio
|
342
|
ID: 14503 - Low velocity impact damage evaluation in fiber glass composite plates using PZT sensors
|
341
|
ID: 14514 - Factors affecting moment redistribution at ultimate in continuous beams prestressed with external CFRP tendons
|
338
|
ID: 14513 - Effect of tool geometry on friction stir processing and fatigue strength of MIG T welds on Al alloys
|
330
|
ID: 14487 - Carbon-based coatings doped by copper: Tribological and mechanical behavior in olive oil lubrication
|
328
|
ID: 14499 - Influence of Al content on the mechanical properties and thermal stability in protective and oxidation atmospheres of Zr–Cr–Al–N coatings
|
324
|
ID: 14516 - Structural, chemical, optical and mechanical properties of Au doped Al-N sputtered coatings
|
324
|
ID: 14498 - Fatigue behaviour of nanoclay reinforced epoxy resin composites
|
323
|
ID: 25841 - Influence of Ag content on mechanical and tribological behavior of DLC coatings
|
322
|
ID: 14492 - Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing
|
320
|
ID: 14491 - External CFRP tendon members: Secondary reactions and moment redistribution
|
318
|
ID: 14494 - Direct off-line robot programming via a common CAD package
|
316
|
ID: 14506 - Structural and mechanical properties of nanocrystalline Zr co-sputtered a-C(:H) amorphous films
|
316
|
ID: 14485 - Influence of tool shoulder geometry on properties of friction stir welds in thin copper sheets
|
314
|
ID: 14508 - Influence of Zr alloying on the mechanical properties, thermal stability and oxidation resistance of Cr–Al–N coatings
|
311
|
ID: 14505 - Neutral axis depth and moment redistribution in FRP and steel reinforced concrete continuous beams
|
310
|
ID: 14490 - Pulsed direct current magnetron sputtered nanocrystalline tin oxide films
|
309
|
ID: 25847 - Nanoindentation of functionally graded hybrid polymer/metal thin films
|
309
|
ID: 14502 - Influence of multi-impacts on GFRP composites laminates
|
307
|
ID: 14483 - An XPS study of Au alloyed Al–O sputtered coatings
|
303
|
ID: 14493 - Development of a quasi-dry electrode for EEG recording
|
300
|
ID: 14497 - Effect of saline environment on mechanical properties of adhesive joints
|
295
|
ID: 25856 - Numerical study of contact forces for crack closure analysis
|
285
|
ID: 14486 - Self-adaptive low friction coatings based on transition metal dichalcogenides
|
278
|
ID: 14488 - Structural and optical studies of Au doped titanium oxide films
|
270
|
ID: 14489 - Frictional behavior of self-adaptive nanostructural Mo–Se–C coatings in different sliding conditions
|
268
|
ID: 14495 - Effect of corrosive solutions on composites laminates subjected to low velocity impact loading
|
262
|
ID: 39088 - Analytical sensitivity matrix for the inverse identification of hardening parameters of metal sheets
|
260
|
ID: 14484 - Effects of the constitution of CrON diffusion barrier on the oxidation resistance and interfacial fracture of duplex coating system
|
233
|
ID: 39089 - NUMERICAL STUDY ON HOLE EXPANSION TESTS OF METAL SHEETS
|
226
|