Utilize este identificador para referenciar este registo: https://hdl.handle.net/10316/87760
Título: Laboratory and in-situ non-destructive methods to evaluate the thermal transmittance and behavior of walls, windows, and construction elements with innovative materials: A review
Autor: Soares, Nelson 
Martins, Cláudio Alexandre de Sousa 
Gonçalves, Margarida 
Santos, Paulo
Silva, Luís Simões da 
Costa, José J. 
Palavras-chave: Thermal transmittance; U-value; heat flow meter; guarded hot plate; guarded hot box; calibrated hot box; infrared thermography
Data: 2019
Editora: Elsevier
Projeto: POCI-01-0145-FEDER-016750 | PTDC/EMS-ENE/6079/2014 
Título da revista, periódico, livro ou evento: Energy and Buildings
Volume: 182
Resumo: The experimental characterization of the overall thermal transmittance of homogeneous, moderately- and non-homogeneous walls, windows, and construction elements with innovative materials is very important to predict their thermal performance. It is also important to evaluate if the standard calculation methods to estimate the U-value of new and existing walls can be applied to more complex configurations, since the correct estimation of this value is a critical requirement when performing building energy simulations or energy audit. This paper provides a survey on the main methods to measure the thermal transmittance and thermal behaviour of construction elements, considering laboratory conditions and in-situ non-destructive measurements. Five methods are described: the heat flow meter (HFM); the guarded hot plate (GHP); the hot box (HB), considering the guarded HB (GHB) and the calibrated HB (CHB); and the infrared thermography (IRT). Then, previous studies dedicated to the assessment of the thermal performance of different heavy- and light-weight walls are discussed. Particular attention is devoted to the measurement of the U-value of non-homogeneous walls, including the effect of thermal bridging caused by steel framing or mortar joints, and the presence of PCMs or new insulation materials in the configuration of the walls.
URI: https://hdl.handle.net/10316/87760
ISSN: 03787788
DOI: 10.1016/j.enbuild.2018.10.021
Direitos: openAccess
Aparece nas coleções:UC Bibliotecas - Artigos em Revistas Internacionais

Mostrar registo em formato completo

Citações SCOPUSTM   

77
Visto em 25/mar/2024

Citações WEB OF SCIENCETM
5

67
Visto em 2/fev/2024

Visualizações de página

251
Visto em 26/mar/2024

Downloads 50

1.415
Visto em 26/mar/2024

Google ScholarTM

Verificar

Altmetric

Altmetric


Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.