Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/4172
Título: | Mechanical characterization of composites prepared from WC powders coated with Ni rich binders | Autor: | Fernandes, C. M. Senos, A. M. R. Vieira, M. T. Antunes, J. M. |
Palavras-chave: | Sputtering; Tungsten carbide; Coated powders; Mechanical properties | Data: | 2008 | Citação: | International Journal of Refractory Metals and Hard Materials. 26:5 (2008) 491-498 | Resumo: | In this study composite powders of WC and Ni/Fe/Cr were prepared in an innovative way, which consists of the sputter-deposition of the metallic binder onto the tungsten carbide particles. Compacts of coated powders were sintered by conventional vacuum sintering followed by hot isostatic pressing (HIP) to reach almost full densities. In order to evaluate the mechanical properties of reduced specimens size (microcomponents), depth-sensing indentation equipment was used. This method enabled the evaluation of the hardness, H, Young's modulus, E, and the yield stress, [sigma]y, in a non-destructive way, using only one sample. For the composites of sputter-coated WC-Ni/Fe/Cr the results showed an effective reduction of H and E due to the properties of Ni and the binder characteristics of the coated powders, such as uniform distribution and nanometer structure. | URI: | https://hdl.handle.net/10316/4172 | DOI: | 10.1016/j.ijrmhm.2007.12.001 | Direitos: | openAccess |
Aparece nas coleções: | FCTUC Eng.Mecânica - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
filee50ed686775c4af9975961e6131ff0df.pdf | 811.38 kB | Adobe PDF | Ver/Abrir |
Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.