Please use this identifier to cite or link to this item:
https://hdl.handle.net/10316/38896
Title: | Caracterização Mecânica de Interface de Próteses Transfemurais eTranstibiais: atrito e propriedades mecânicas | Authors: | Ferreira, Sara Suzana | Orientador: | Ramalho, Amílcar Lopes | Keywords: | Interface; Viscoelasticidade; Histerese; Envelhecimento; Atrito; Aderência; Liner; Viscoelasticity; Stiffness; Hysteresis; Ageing; Friction; Adhesion | Issue Date: | 17-Feb-2014 | Place of publication or event: | Coimbra | Abstract: | O objectivo deste trabalho é caracterizar o comportamento mecânico de interfaces
de próteses transfemurais e transtibiais, assim como a interacção entre a pele e superfícies
texturizadas.
No âmbito desta dissertação, foram estudados três tipos materiais aplicados em
interfaces de próteses, sujeitos a três períodos de envelhecimento. O envelhecimento
químico destes materiais foi realizado embebendo as amostras em suor artificial. Este
processo de envelhecimento permitiu caracterizar o comportamento dos materiais ao longo
do tempo e após compressão estática e dinâmica.
Os resultados estáticos revelam que, as interfaces em estudo, apresentam um
comportamento característico de materiais viscoelásticos, uma primeira fase linear e uma
segunda fase da curva não linear. Através das curvas tensão-deformação obtidas nos
ensaios e análise dos resultados, foram desenvolvidos modelos teóricos que permitem
simular o comportamento destes materiais quando solicitados em compressão.
Os dados recolhidos no ensaio dinâmico foram abordados inicialmente através do
modelo Kelvin-Voigt, sendo posteriormente verificado que o comportamento do
amortecedor apenas era visível durante o carregamento do material. Como tal, foi
desenvolvido um modelo reológico que representava esse comportamento.
Os ensaios de atrito realizados na pele do antebraço demonstraram que a presença
de depressões e saliências diminuía significativamente o coeficiente de atrito, quando
comparadas com a superfície lisa. Os resultados da interacção entre a pele do antebraço e
as texturas das superfícies no ensaio de aderência revelam que, quanto maior a área de
contacto entre a pele e o material, maior é a força adesiva. Esta diminui para a superfície
com depressões e é inexistente na superfície com saliências devido à diminuição drástica da área de contacto. The purpose of this study is to characterize the mechanical behavior of transtibial and transfemoral prosthetic liners, as well as the interaction between the skin and texturized surfaces. Within this dissertation, three different materials applied in prosthetic liners, subject to three periods of aging, were studied. The chemical aging of these materials was carried out by soaking the samples in artificial sweat. This aging process allowed the characterization of the behavior of these materials over time and after static and dynamic compression. The static results show that, the liners under study, present typical behavior of viscoelastic materials, a first linear phase and a second stage of the curve non-linear. Through stress-strain curves obtained in the test and by the results analysis, theoretical models have been developed to simulate the behavior of these materials during a compression request. The collected data for the dynamic tests were initially approached through Kelvin- Voigt model and was subsequently verified that the damper behavior was only visible during the loading of the material. As such, a rheological model representing this behavior was developed. The friction tests performed on the forearm skin showed that the presence of depressions and projections decrease significantly the friction coefficient, when compared to the smooth surface. The results from the interaction between the forearm skin and the surfaces textures in the adhesion tests show that the larger the contact area between the skin and the material, the greater the adhesive force. That drops to the surface with depressions and is nonexistent in the projections surface due to the drastic decrease of the contact area. |
Description: | Dissertação de Mestrado Integrado em Engenharia Mecânica apresentada à Faculdade de Ciências e Tecnologia da Universidade de Coimbra. | URI: | https://hdl.handle.net/10316/38896 | Rights: | openAccess |
Appears in Collections: | UC - Dissertações de Mestrado FCTUC Eng.Mecânica - Teses de Mestrado |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
117 Caracterização de interface de próteses-Sara Ferreira.pdf | 17.04 MB | Adobe PDF | View/Open |
Page view(s)
263
checked on Oct 15, 2024
Download(s)
55
checked on Oct 15, 2024
Google ScholarTM
Check
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.