Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/113387
Título: | Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics | Autor: | Vinciguerra, Michael R. Patel, Dinesh K. Zu, Wuzhou Tavakoli, Mahmoud Majidi, Carmel Yao, Lining |
Palavras-chave: | digital fabrication; 3D printing; 4D printing; liquid crystal elastomer (LCE); liquid metal; soft robotics | Data: | 24-Mai-2023 | Editora: | American Chemical Society | Projeto: | FCT - Carnegie Mellon Portugal Program - project ExoSkins (CMU-EXPL 2021/CMU/TIC/0045/2021/ | Título da revista, periódico, livro ou evento: | ACS Applied Materials and Interfaces | Volume: | 15 | Número: | 20 | Resumo: | Liquid crystal elastomers (LCEs) have grown in popularity in recent years as a stimuli-responsive material for soft actuators and shape reconfigurable structures. To make these material systems electrically responsive, they must be integrated with soft conductive materials that match the compliance and deformability of the LCE. This study introduces a design and manufacturing methodology for combining direct ink write (DIW) 3D printing of soft, stretchable conductive inks with DIW-based "4D printing" of LCE to create fully integrated, electrically responsive, shape programmable matter. The conductive ink is composed of a soft thermoplastic elastomer, a liquid metal alloy (eutectic gallium indium, EGaIn), and silver flakes, exhibiting both high stretchability and conductivity (order of 105 S m-1). Empirical tuning of the LCE printing parameters gives rise to a smooth surface (<10 μm) for patterning the conductive ink with controlled trace dimensions. This multimaterial printing method is used to create shape reconfigurable LCE devices with on-demand circuit patterning that could otherwise not be easily fabricated through traditional means, such as an LCE bending actuator able to blink a Morse code signal and an LCE crawler with an on/off photoresistor controller. In contrast to existing fabrication methodologies, the inclusion of the conductive ink allows for stable power delivery to surface mount devices and Joule heating traces in a highly dynamic LCE system. This digital fabrication approach can be leveraged to push LCE actuators closer to becoming functional devices, such as shape programmable antennas and actuators with integrated sensing. | URI: | https://hdl.handle.net/10316/113387 | ISSN: | 1944-8244 1944-8252 |
DOI: | 10.1021/acsami.2c23028 | Direitos: | openAccess |
Aparece nas coleções: | FCTUC Eng.Electrotécnica - Artigos em Revistas Internacionais I&D ISR - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Multimaterial-Printing-of-Liquid-Crystal-Elastomers-with-Integrated-Stretchable-ElectronicsACS-Applied-Materials-and-Interfaces.pdf | 8.68 MB | Adobe PDF | Ver/Abrir |
Visualizações de página
44
Visto em 14/ago/2024
Downloads
35
Visto em 14/ago/2024
Google ScholarTM
Verificar
Altmetric
Altmetric
Este registo está protegido por Licença Creative Commons