Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/107354
Título: | Reabilitação térmica: Contributo das argamassas com incorporação de material de mudança de fase | Outros títulos: | Thermal rehabilitation: Contribution of mortars with incorporation of phase change materials | Autor: | Cunha, Sandra Aguiar, José Ferreira, Victor Tadeu, António |
Palavras-chave: | Argamassas; Materiais de mudança de fase; Reabilitação térmica; Mortars; Phase change materials; Thermal rehabilitation | Data: | 2019 | Editora: | Universidade Federal do Rio de Janeiro | Projeto: | FCT - SFRH/BD/95611/2013 | Título da revista, periódico, livro ou evento: | Revista Materia | Volume: | 24 | Número: | 2 | Resumo: | O setor residencial encontra-se muitas vezes envelhecido, apresentando necessidades de intervenções urgentes.
Assim, torna-se importante reabilitar edifícios do ponto de vista estrutural, estético e funcional. A reabilitação
térmica é uma importante oportunidade para atingir níveis mais elevados de desempenho energético,
reduzindo a elevada dependência energética dos países. As operações de reabilitação baseadas na utilização
de materiais com capacidade de armazenamento e liberação de energia contribuem para a obtenção de edifícios
mais eficientes em termos energéticos. Combinando a utilização de materiais inteligentes e fontes de
energia renováveis, é possível aumentar o conforto térmico dentro dos edifícios. O principal objetivo deste
trabalho consistiu na caracterização física, mecânica e térmica de argamassas baseadas em ligantes específicos
para reabilitação, com incorporação de materiais de mudança de fase (PCM). Foram estudadas argamassas
à base de cal aérea e gesso, sendo que, para cada ligante, foram desenvolvidas argamassas com e sem
incorporação de PCM. Observou-se que a incorporação de PCM nas argamassas originou diferenças no seu
comportamento físico, mecânico e térmico. Verificou-se uma diminuição das resistências à flexão e compressão,
assim como uma melhorado comportamento térmico, reduzindo a temperatura máxima, aumentando a
temperatura mínima e diminuindo as necessidades de aquecimento e arrefecimento. The residential sector is sometimes old, with urgent intervention needs. Thus, it is important to rehabilitate buildings from a structural, aesthetic and functional point of view. The thermal rehabilitation is an important opportunity to reach higher levels of energetic performance, reducing the high energetic dependence of the countries. Rehabilitation operations based in the utilization of materials with the capability to store and release energy contribute to obtain more energy efficient buildings. Combining the use of smart materials and renewable energy sources, it is possible to increase the thermal comfort inside the buildings. The main purpose of this study was the physical, mechanical and thermal characterization of mortars based in specific binders for rehabilitation with incorporation of phase change materials (PCM). Mortars based in aerial lime and gypsum were studied. For each binder, mortars with and without incorporation of PCM were developed. It was observed that the incorporation of PCM in mortars caused differences in the physical, mechanical and thermal behavior. It was verified a decrease in the flexural and compressive strengths, and an increase in the thermal behavior, reducing the maximum temperature, increasing the minimum temperature and decreasing the heating and cooling needs. |
URI: | https://hdl.handle.net/10316/107354 | ISSN: | 1517-7076 | DOI: | 10.1590/s1517-707620190002.0660 | Direitos: | openAccess |
Aparece nas coleções: | FCTUC Eng.Civil - Artigos em Revistas Nacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Thermal-rehabilitation-Contribution-of-mortars-with-incorporation-of-phase-change-materialsRevista-Materia.pdf | 446.41 kB | Adobe PDF | Ver/Abrir |
Citações SCOPUSTM
1
Visto em 2/set/2024
Visualizações de página
76
Visto em 10/set/2024
Downloads
47
Visto em 10/set/2024
Google ScholarTM
Verificar
Altmetric
Altmetric
Este registo está protegido por Licença Creative Commons