Please use this identifier to cite or link to this item:
https://hdl.handle.net/10316/101325
Title: | Comparative Analysis of Different Cutting Milling Strategies Applied in Duplex Stainless Steel | Authors: | Amaro, Paulo Ferreira, Pedro Simões, Fernando |
Keywords: | Duplex Stainless Steels; Conventional Trochoidal Milling; Tool Life; Material Removal Rate; Tool Wear | Issue Date: | 2020 | Serial title, monograph or event: | Procedia Manufacturing | Volume: | 47 | Abstract: | It is well known that the duplex stainless steels are considered to be difficult-to-machine because of its high toughness, low thermal conductivity, and high degree of work hardening. When machining this type of materials, the tools presents an irregular wear and often occur a built-up edge (BLUE) [1]. This work studies the influence of cutting milling strategy in the machinability of these alloys, comparing conventional and trochoidal toolpaths, milled with a tool that have interchangeable inserts coated with AlTiN. Concerning to the cutting parameters, the values recommended by the tool manufacturer (90-120 m/min.) were applied to the conventional milling strategy, while for the trochoidal milling strategy were applied higher cutting speeds, in a range of 120 to 300 m/min. For both strategies, the results shown that the tool edge damage is characterized by a progressive development of a flank wear, followed by chipping phenomenon, that usually first appear localized in the region of the cutting edge where the contact with the chip ends. As the machining continues, a non-uniform chipping appears along the cutting edge. For the conventional milling strategy, the best results were obtained for the cutting speed of 120 m/min, with a material removal rate of 17,16 cm3/min. and a tool life of 20 minutes. For the trochoidal strategy, it is possible to double the cutting speed (240 m/min), maintaining the same tool life time (20 min.), and increasing the material removal rate up to 23,66 cm3/min. | URI: | https://hdl.handle.net/10316/101325 | ISSN: | 23519789 | DOI: | 10.1016/j.promfg.2020.04.132 | Rights: | openAccess |
Appears in Collections: | I&D CEMMPRE - Artigos em Revistas Internacionais |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
1-s2.0-S2351978920311884-main.pdf | 1.32 MB | Adobe PDF | View/Open |
SCOPUSTM
Citations
4
checked on Nov 17, 2022
WEB OF SCIENCETM
Citations
2
checked on May 2, 2023
Page view(s)
64
checked on Aug 28, 2024
Download(s)
71
checked on Aug 28, 2024
Google ScholarTM
Check
Altmetric
Altmetric
This item is licensed under a Creative Commons License