Please use this identifier to cite or link to this item:
https://hdl.handle.net/10316/99660
Title: | Construção e Avaliação Térmica de um Coletor Solar | Authors: | Carvalho, João Chaves | Orientador: | Figueiredo, António Rui de Almeida Silva, Vitor Manuel Alves da |
Keywords: | Energia Solar; Coletor Solar; Secador Solar; Matriz Porosa Metálica; Palha de Aço; Rendimento Térmico; Solar Energy; Solar Collector; Solar Dryer; Metal Porous Matrix; Steel Wool; Thermal Efficiency | Issue Date: | Jul-2013 | Place of publication or event: | Coimbra | Abstract: | A necessidade de um crescente recurso às energias renováveis é incontornável.
As energias renováveis são fontes limpas de energia. A sua utilização permite reduzir os
impactes ambientais, produzindo menos desperdícios, e contribui para um
desenvolvimento sustentável da sociedade atual e futura.
A energia solar é a fonte mais abundante do nosso planeta e a fonte de todas as
energias. As principais formas da energia solar são o calor e a luz. O aproveitamento da
energia para aquecimento do ar é obtida a partir de coletores solares térmicos. Esses
coletores são utilizados para diversas finalidades como climatização e secagem.
A montagem experimental de um coletor solar para aquecimento de ar foi
concebida em Coimbra com o objetivo de estudar o desempenho térmico do mesmo. É
inovador pois apresenta baixo custo, simplicidade de construção e consiste na utilização de
uma matriz porosa metálica como elemento absorvedor, a palha de aço, atravessada por um
escoamento forçado de ar. Deste modo o coletor funcionará como um gerador de ar quente,
com o intuito de vir a integrar um equipamento futuro, para a secagem de produtos
agroalimentares.
A ideia principal é estudar as relações entre o comportamento térmico do
coletor, a radiação solar e a diferença de temperaturas, sendo fruto de reflexão a possível
diminuição de perdas pela cobertura superior do coletor e a maximização da extração de
calor da matriz, melhorando assim o rendimento térmico.
De acordo com os resultados obtidos nos ensaios realizados o coletor apresenta
valores para aquecimento de ar bastante satisfatórios, sendo capaz de aumentar a
temperatura em aproximadamente 45ºC. O rendimento térmico médio situa-se pelos 29%,
sendo possível melhora-lo efetuando algumas alterações ao nível da constituição e da
inclinação do coletor. The need of an increasing resource to the renewable energy is inevitable. Renewable energies are clean energy sources. Its use reduces the environmental impact, producing less waste and it contributes to a sustainable development of the current and future society. Solar energy is the most abundant source of our planet and the source of all energies. The main ways of solar energy are heat and light. The use of the energy for heating the air is obtained from solar thermal collectors. These collectors are used for various purposes such as air conditioning and drying. The experimental setup of a solar collector for heating the air was designed in Coimbra with the aim of studying its thermal performance. It is highly innovative because it has low cost, simplicity of construction and it consists in using a metal porous matrix as an absorber, steel wool, crossed by a forced flow of air. Thus the collector will work as a hot air generator, in order to integrate a future equipment, for the drying of agricultural food products. The main idea is to study the relationship between the thermal performance of the collector, the solar radiation and the temperature difference, being the result of reflection the possible reduction of loss from the top cover of the collector and the maximizing heat extraction from the matrix, thus improving the thermal efficiency. According to the results obtained in the tests performed the collector shows values for heating the air satisfactory, being able to increase the temperature at approximately 45°C. The average thermal efficiency lies by 29%, being possible to improve it by making some changes in the constitution and the slope of the collector. |
Description: | Dissertação de Mestrado em Engenharia do Ambiente apresentada à Faculdade de Ciências e Tecnologia da Universidade de Coimbra. | URI: | https://hdl.handle.net/10316/99660 | Rights: | openAccess |
Appears in Collections: | FCTUC Eng.Mecânica - Teses de Mestrado |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Dissertação_MIEA_João Carvalho.pdf | 18.63 MB | Adobe PDF | View/Open |
Page view(s)
130
checked on Oct 15, 2024
Download(s)
108
checked on Oct 15, 2024
Google ScholarTM
Check
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.