Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/100534
Title: Ion Exchange to Capture Iron after Real Effluent Treatment by Fenton’s Process
Authors: Domingues, Eva 
Fernandes, Eryk 
Vaz, Telma 
Gomes, João 
Castro-Silva, Sergio
Martins, Rui C. 
Quinta-Ferreira, Rosa 
Ferreira, Licínio 
Keywords: fenton process; iron sludge; strong acid cation exchange; olive oil extraction; fenton process
Issue Date: 2022
Project: POCI-01-0247-FEDER-033193 
FCT PhD Grant (SFRH/BD/144096/2019 
CEECIND/01207/2018 
UIDB/00102/2020 
Serial title, monograph or event: Water (Switzerland)
Volume: 14
Issue: 5
Abstract: The main drawback of Fenton0s process is the formation of ferric sludge. In this work, ion exchange (IE) appears as a complement to the Fenton process, allowing, on the one hand, to remove the iron excess present in the sludge, as well as reduce the COD of the real olive oil industry extraction wastewater (OOIEW) from the Fenton process. The Fenton process uses iron (II) sulfate as catalyst, therefore concentrations of iron up to 2 g L1 could be present in the treated OOIEW. The iron and COD adsorption equilibrium behavior has been modelized by Langmuir, Freundlich and Temkin isotherms. Moreover, the resin efficiency was tested in a continuous fixed-bed column. It was concluded that the resin maintains iron adsorption capacity over at least three reuse cycles. Overall Fenton’s process followed by ion exchange seems to be a promising approach for the treatment of cumbersome industrial wastewaters.
URI: http://hdl.handle.net/10316/100534
ISSN: 2073-4441
DOI: 10.3390/w14050706
Rights: openAccess
Appears in Collections:I&D CIEPQPF - Artigos em Revistas Internacionais

Show full item record

Google ScholarTM

Check

Altmetric

Altmetric


This item is licensed under a Creative Commons License Creative Commons