Please use this identifier to cite or link to this item: https://hdl.handle.net/10316/20539
Title: Analysis of the influence of process parameters in the deep drawing of a cylindrical cup
Authors: Simões, Vasco Manuel Neto 
Orientador: Menezes, Luis Filipe Martins
Laurent, Hervé
Keywords: Estampagem; Simulação numérica,
Issue Date: Jul-2012
Citation: SIMÕES, Vasco Manuel Neto - Analysis of the influence of process parameters in the deep drawing of a cylindrical cup. Coimbra:[s.n.], 2012. Dissertação de Mestrado
Serial title, monograph or event: Analysis of the influence of process parameters in the deep drawing of a cylindrical cup
Place of publication or event: Coimbra
Abstract: Resumo Actualmente, os processos de estampagem de chapas metálica são usados para produzir uma grande parte dos componentes metálicos que utilizamos no nosso dia-a-dia. O bom acabamento superficial dos componentes, associado ao reduzido custo por peça devido à elevada cadência de produção, são alguns dos factores que contribuem para a selecção preferencial do processo de estampagem na indústria automóvel. Actualmente, a simulação numérica tem um papel fundamental no estudo do processo e na previsão de alguns defeitos. O retorno elástico é um dos defeitos com maior impacto no sucesso de uma operação de estampagem. Assim, têm sido desenvolvidos vários estudos com o objectivo de melhor a previsão deste fenómeno. Um dos testes propostos para estudar o fenómeno de retorno elástico é o ensaio de Demeri, que consiste na estampagem de uma taça cilíndrica, seguido do corte de um anel na parede vertical e no corte transversal desse anel. A abertura do anel é uma medida directa do retorno elástico, que pela sua simplicidade permite uma fácil comparação entre os resultados numéricos e experimentais. O estudo descrito neste trabalho resulta de uma parceria entre o CEMUC e o LIMATB, com o objectivo de analisar o processo de estampagem de uma taça cilíndrica, correspondente à primeira etapa do ensaio de Demeri. O material seleccionado é uma liga de alumínio AA5754-O, uma vez que se procura aumentar a sua utilização na indústria automóvel, devido às suas boas propriedades mecânicas. No entanto, caracterizam-se também por apresentarem elevados valores de retorno elástico. Neste trabalho analisa-se o efeito de parâmetros como: (i) a variação das dimensões da matriz; (ii) a influência das condições de contacto com atrito; e (iii) a influência das pressões de contacto, na produção de taças cilíndricas com estiramento da parede vertical. A análise destes parâmetros é realizada com o auxílio da simulação numérica e de ensaios experimentais. A simulação numérica do processo foi realizada com o programa DD3IMP, desenvolvido no CEMUC, e a análise experimental foi efectuada no LIMATB. A análise das forças associadas ao processo e a distribuição da espessura da taça permitiu uma melhor compreensão acerca da influência dos parâmetros em estudo. A principal conclusão deste trabalho é que a ferramenta com maior impacto no processo de conformação é a matriz, uma vez que o seu diâmetro interno dita a sua folga em relação ao punção e é a ferramenta para a qual ocorrem as maiores pressões de contacto com a chapa. Estes resultados obtidos da análise numérica são corroborados pela análise experimental.
Abstract Nowadays, sheet metal forming process allow high rates of metal components used in our daily life. Components with smooth surfaces associated to the low cost per part, due to the high rate of production, are the main factors which make this process the first choice for the automotive industry. Currently, numerical simulation has a key role in the study of the forming processes and defects prediction. The springback is one of the defects with the greatest influence on the success of stamping operations. Thus, several studies have been developed in order to better predict this phenomenon. The benchmark test proposed for studying the springback phenomenon is the Demeri test which consists in cutting a ring specimen from a full drawn cup and then splitting the ring longitudinally along a radial plane. The ring opening gives a direct measure of the springback phenomenon which, due to its simplicity, allows the direct comparison between the numerical and experimental results. This work results from a partnership between LIMATB and CEMUC aiming to analyse the deep drawing process of a cylindrical cup, corresponding to the first step of the Demeri test. The material used is an aluminium alloy AA5754-O which industry seeks due to its good mechanical properties. However, it is also characterized by presenting high springback values. This work analyses the effect of several parameters such as: (i) variation of die dimensions; (ii) influence of the contact with friction conditions; and (iii) influence of contact pressures in the production of cylindrical cups with ironing on the its wall. The analysis of these parameters is performed with the aid of numerical simulation and experimental tests. The numerical simulations are performed using the in-house code DD3IMP, developed by CEMUC, and the experimental tests were performed at LIMATB laboratory. I order to better understand the influence of the parameters in study, this work provides an analysis of the forces involved in the process as well as the thickness distribution. The main conclusion are that the die has the most influence on the process, since its inner diameter limits the gap to the punch, and has the highest contact pressure on the contact with the sheet. The results obtained by numerical simulation are confirmed by the experimental results.
Description: Dissertação de Mestrado em Engenharia Mecânica aoresentda à Faculdade de Ciência e Tecnologia da Universidade de Coimbra
URI: https://hdl.handle.net/10316/20539
Rights: openAccess
Appears in Collections:UC - Dissertações de Mestrado
FCTUC Eng.Mecânica - Teses de Mestrado

Files in This Item:
File Description SizeFormat
Tese_VascoSimoes2007108626.pdf7.01 MBAdobe PDFView/Open
Show full item record

Page view(s) 50

439
checked on Mar 26, 2024

Download(s) 50

432
checked on Mar 26, 2024

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.