Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/12886
Título: | The influence of pH on the leaching behaviour of inorganic components from municipal solid waste APC residues | Autor: | Quina, Margarida J. Bordado, João C. M. Quinta-Ferreira, Rosa M. |
Data: | Set-2009 | Editora: | Elsevier Ltd. | Citação: | Waste Management. 29:9 (2009) 2483-2493 | Resumo: | The influence of pH on the leaching behaviour of air pollution control (APC) residues produced in municipal solid waste incineration (MSWI) is addressed in this study. The residue is considered hazardous waste, and in accordance with their chemical properties, the leaching of contaminants into the environment is the main concern. Several leaching tests can be used for research studies or regulatory purposes, where a wide variety of conditions may be tested. Our work deals mainly with the leaching behaviour of toxic heavy metals (Pb, Cd, Zn, Cr, Ni, Cu) and inorganics associated with soluble salts (Na, K, Ca, Cl). The main goal is to obtain an overview of the leachability of APC residues produced in a Portuguese MSWI process. Among the different variables that may have influence on the leaching behaviour, pH of the leachant solution is the most important one, and was evaluated through pH static tests. The acid neutralization capacity (ANC) of the residue was also determined, which is in the range of 6.2-6.8 meq g-1 (for pH = 7) and 10.1-11.6 meq g-1 (for pH = 4). The analysis of the leaching behaviour is particularly important when the leaching is solubility controlled. The amphoteric behaviour of some elements was observed, namely for Pb and Zn, which is characterized through high solubilization at low and high pH and moderate or low solubility at neutral or moderate high pH. The solubility curves for Pb, Cd, Zn, Cr, Ni and Cu as a function of pH were obtained, which are very useful for predicting the leaching behaviour in different scenarios. The solubility of K and Na reveals to be nearly independent of the solution pH and the released amount is mainly availability-controlled. Moreover, the pH static test showed that Cl- is the most pH-independent species. The APC residue turns out to be a hazardous waste because of the high leaching of lead and chloride. On the other hand, leaching of elements like cadmium, nickel and copper is limited by the high pH of the residue, and as long as the waste keeps its ANC, the risk of mobilization of these elements is low | URI: | https://hdl.handle.net/10316/12886 | ISSN: | 0956-053X | DOI: | 10.1016/j.wasman.2009.05.012 | Direitos: | openAccess |
Aparece nas coleções: | FCTUC Eng.Química - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
The influence of pH on the leaching behaviour.pdf | 415.73 kB | Adobe PDF | Ver/Abrir |
Citações SCOPUSTM
171
Visto em 23/set/2024
Citações WEB OF SCIENCETM
161
Visto em 2/set/2024
Visualizações de página
298
Visto em 24/set/2024
Downloads 50
1.366
Visto em 24/set/2024
Google ScholarTM
Verificar
Altmetric
Altmetric
Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.